Sealants · Tapes · Fixings
A comprehensive range of specialist adhesives, waterproof sealants, sealing tapes, fixing hardware, edge profiles, and waterproofing compounds — engineered for a fully integrated installation system.

Available To Order
Every Insutile® Accessory is engineered and tested to work with our boards — order them together for a fully integrated, single-source installation. Each card shows what the accessory does, when to use it, and which boards it is used with.
High-performance hybrid polymer sealant and adhesive for bonding boards, sealing joints, and waterproofing connections.
Use it forFixing boards to substrates and sealing joints, fixings, and penetrations.
Self-adhesive butyl-backed fleece tape for creating permanent waterproof seals at board joints and corners.
Use it forKeeping board joints and corners watertight in showers and wet zones.
Alkali-resistant fiberglass mesh tape for reinforcing board joints before tiling.
Use it forStrengthening the joints between boards before the tile adhesive goes on.
Wide-head washers in galvanised metal and plastic options, with compatible screws, for mechanical fixing without crushing the XPS core.
Use it forFixing boards to studs, battens, and masonry.
Liquid-applied waterproofing compound for coating board surfaces, joints, and transitions.
Use it forCoating board faces, joints, and transitions in wet areas before tiling.
Flexible, polymer-modified thin-set adhesive formulated for XPS surfaces.
Use it forBedding ceramic, porcelain, and natural stone tile onto the board face.
Pre-formed internal and external corner pieces for sealing wall junctions.
Use it forSealing internal and external corners where walls and trays meet.
Stainless steel and PVC edge profiles for finishing exposed board edges.
Use it forFinishing exposed edges on counters, shelves, partitions, and boxing.
Double-sided tape factory-applied in the fold of Insutile® Angle Board — specify it when ordering.
Use it forHolding the fold at the correct angle while the adhesive cures — no clamps or bracing.
Point and line drains matched to your tray configuration — centre, offset, or linear placement, in standard and custom sizes.
Use it forDraining Insutile® Shower Underlay trays — specify the drain with your tray order.
Waterproof fleece layers made to order for Insutile® Shower Underlay trays.
Use it forSealing the tray surface and its transitions to surrounding walls and floors.
Custom drain shapes, special sizes, and project-specific accessory kits are available on request.
Request a QuoteCompatibility at a Glance
Every accessory is tested and certified for the boards marked below — so a complete installation can be specified and ordered from one source.
| Accessory | Build Board | Flex Board | Angle Board | Shower Underlay |
|---|---|---|---|---|
| MSP Sealant & Adhesive | ✓ | ✓ | ✓ | ✓ |
| Waterproof Sealing Tape | ✓ | ✓ | ✓ | ✓ |
| Joint Reinforcing Tape | ✓ | ✓ | ✓ | ✓ |
| Fixing Washers & Screws * | ✓ | ✓ | ✓ | ✓ |
| Waterproofing Membrane | ✓ | ✓ | ✓ | ✓ |
| Tile Adhesive | ✓ | ✓ | ✓ | ✓ |
| Waterproof Corner Seals | ✓ | – | ✓ | ✓ |
| Edge Profiles | ✓ | ✓ | ✓ | – |
| Pre-Applied Double-Sided Tape | – | – | ✓ | – |
| Shower Drains · Point & Line | – | – | – | ✓ |
| Fleece Waterproofing Layer | – | – | – | ✓ |
* Fixing washers are supplied as standard with every board order — additional washers, screws, and all other accessories are available to order.
The Accessories
The fixings, adhesive and waterproofing components supplied with, or specified for, Insutile® boards and trays.





Contact our team to find the right accessories for your project and get installation guidance.
Leave your details and our team will get back to you shortly.