A product by Insutech Downloads EN

Roofs · Walls · Floors

Insutile® Easy Board

Lightweight Construction Boards

A pre-tiled insulation board — porcelain tile factory-bonded to a precision-cut XPS core. The finish and the insulation go down together, in a single step.

Insutile® Easy Board — pre-tiled insulation boards on a roof terrace
Home/Technology/Easy Board

What is Insutile® Easy Board?

Pre-Tiled Insulation Board

Insutile® Easy Board is a finished insulating tile: a porcelain tile factory-bonded to an extruded polystyrene (XPS) board with precision-cut slits. Installing the board installs the finish and the insulation layer in the same operation.

The precision-cut XPS core provides the thermal performance and keeps the board light, while the bonded tile provides a hard-wearing, finished surface. Suitable for internal and external use on roofs, walls, and floors.

Insutile® Easy Board
4 sizes30 × 30 to 60 × 120 cm
Customizable Dimensions

Standard panels of 30 × 30, 30 × 60, 60 × 60 and 60 × 120 cm in 2, 3, 4 and 5 cm — other dimensions and thicknesses are manufactured to order.

0.034W/mK thermal conductivity
Insulating XPS Core

The closed-cell XPS core delivers λ ≤ 0.034 W/mK — the finished surface carries real insulation value, maintained even in humid and wet conditions.

Insutile® Easy Board video

Product Video

Easy Board explained

This animation shows the two-layer construction, the tongue-and-groove and straight-cut edge profiles, the four panel sizes and thicknesses, tile designs, the three supply options, laying in an adhesive bed, and six typical applications.

All Product Videos
Insutile® Easy Board layers: porcelain tile, factory bond, precision-cut XPS core

Board Construction

Two layers, factory-bonded

The tile is bonded to the XPS board mechanically and chemically at the factory — delivered as a single finished panel.

1 · Porcelain Tile Finish

Hard-wearing finished surface — any design, colour, or finish sourced to order.

2 · Factory Bond

High-strength bonding layer applied at manufacture — no site tiling required.

3 · Precision-Cut XPS Core

Closed-cell extruded polystyrene with precision-cut slits — waterproof & insulating.

Edge Profiles

Two edge profiles

Insutile® Easy Board — tongue-and-groove edge profile
Tongue & Groove

Stepped, interlocking edges align adjacent panels and maintain a continuous insulation layer across the joint.

Insutile® Easy Board — straight cut edge profile
Straight Cut

Flush, square-cut edges, butt-jointed and grouted in the same way as a conventional tiled finish.

Tile Designs

Tile designs

Four designs are held as manufacturing standards; any other tile design, colour, size, or finish is sourced and bonded to order.

Crema marble-effect tile design
Crema MarbleStandard · warm beige veining
Pearl grey marble-effect tile design
Pearl Grey MarbleStandard · cool grey veining
Sand travertine-effect tile design
Sand TravertineStandard · natural stone banding
White calacatta-effect tile design
White CalacattaStandard · fine grey-gold veining
Custom designs · Any tile design, colour, size, or finish can be sourced and bonded to order — specify the tile your project requires, or supply your own. Contact Our Team

Sizes and Specs

Standard dimensions and key performance specs

The values below are our manufacturing standards for Insutile® Easy Board. Specifications and sizing can be customized to suit your project — contact our team for special orders.

Download Data Sheet

Size Chart · Easy Board

Panel sizeThicknessTile design
300 × 30020 / 30 / 40 / 50standard designs or to order
300 × 60020 / 30 / 40 / 50standard designs or to order
600 × 60020 / 30 / 40 / 50standard designs or to order
600 × 120020 / 30 / 40 / 50standard designs or to order

All dimensions in millimetres. Custom panel sizes, thicknesses and specifications are available to order — confirm with our team when specifying.

Specification Sheet · Easy Board

PropertyValueStandard
Core materialExtruded polystyrene (XPS)closed-cell, precision-cut
FacingPorcelain tile, factory-bondeddesign to order
Water absorption (core)≤ 0.1 %EN 12087
Compressive strength (core)≥ 300 kPaEN 826
Thermal conductivity (core)λ ≤ 0.034 W/mKASTM C518
Service temperature−50 °C to +75 °CEN 13164

Where Insutile® Easy Board Performs

Internal and external — roofs, walls, and floors

View Solutions
Rooftop terrace finished with Easy Board Modern balcony floor Exterior wall cladding Pool deck surround Indoor-outdoor floor Courtyard walkway

Roofs & Terraces

A finished, insulated roof surface in a single layer — no screed and no separate tiling stage.

Balconies

A weather-resistant finished surface with insulation value on exposed balcony slabs.

Exterior Walls & Cladding

Insulated tiled facades and wall finishes, installed as one panel.

Pool Surrounds

Hard-wearing, water-resistant deck finish for pool surrounds and leisure areas.

Floors

Insulating floor finish for internal and external areas, laid directly on the substrate.

Renovation & Re-Roofing

Upgrades the insulation and the finish of an existing roof or floor in one operation.

Key Features & Benefits

Performance characteristics

Single-Step Installation

The finish and the insulation are installed together — no separate tiling trade.

Thermal Insulation

λ ≤ 0.034 W/mK XPS core — insulation performance maintained in humid and wet conditions.

Waterproof XPS Core

Closed-cell core absorbs ≤ 0.1% water — suitable for exposed roofs, terraces, and wet areas.

Lightweight

A fraction of the weight of screed-and-tile build-ups — reduces permanent loads on roofs.

Dimensional Stability

The XPS core doesn't warp, expand, or shrink — the tiled surface stays flat year-round.

Any Tile Design

Four standard designs, or any tile sourced and bonded to order to suit the specification.

Installation Steps

Seven steps to a finished surface

Download Guide
01Surface preparation 02Waterproofing 03Drainage 04Layout & dry-fit 05Bedding 06Jointing 07Finishing
Installation Note · Laid in a Full Bed

Panels are laid tile-face up in a full bed of cement-based tile adhesive over the prepared, waterproofed substrate — set out from the drainage outlet or leading edge, with joints staggered between courses.

Movement Joints

In large areas, provide a 10 mm movement joint approximately every 15 m, filled with a flexible sealant. Joints between panels are grouted as a conventional tiled finish.

Steps shown are a general guide — site conditions and build-ups vary; always confirm the method with a qualified contractor or specifier.

FAQ

Frequently asked questions

What is Easy Board?

A porcelain tile bonded at the factory to a precision-cut XPS board, so the finish and the insulation are installed in one step.

What sizes and thicknesses are available?

Standard panels are 30 × 30, 30 × 60, 60 × 60 and 60 × 120 cm, in 2, 3, 4 and 5 cm thicknesses. Other dimensions and thicknesses are manufactured to order.

Which tile designs can I choose?

Any. The designs shown on this page are examples. Any tile design, colour, size or finish can be sourced and bonded to order, or you can supply your own tile.

Which edge profiles are available?

Two: tongue and groove, and straight cut.

How is Easy Board laid?

Panels are laid tile-face up in a full bed of cement-based tile adhesive over the prepared, waterproofed substrate, with joints staggered between courses.

Where can it be used?

Roofs and terraces, balconies, exterior walls and cladding, pool surrounds, floors, and renovation and re-roofing work.

Range

Explore Our Range

Insutile® offers a complete line of specialty construction insulation products:

All Products

Ready to Specify Easy Board?

Get in touch with our technical team for project-specific sizing, tile designs, and supply formats.