A product by Insutech Downloads EN

Niches · Shelves · Seats

Insutile® Trays and Niches

Lightweight Construction Boards

Pre-formed shower components built from the Insutile® board construction — recessed niches, corner shelves, and seats, supplied one-piece and ready to tile.

Insutile® pre-formed niches, corner shelf and bench
Home/Technology/Trays and Niches

What are Insutile® Trays and Niches?

Pre-Formed Shower Components

Insutile® Trays and Niches are pre-formed components for tiled showers and wet areas — recessed storage niches, corner shelves, and seats — built from the same board construction as the rest of the Insutile® range: a waterproof XPS core with reinforced, tile-ready faces.

Each component arrives as a single factory-formed piece, so the geometry is fixed before it reaches site. Niches carry a front mounting flange that sits flush with the surrounding wall board; the joints are taped and the unit is tiled with the rest of the wall.

Insutile® pre-formed shower niche
12.5 mmboard construction
Insutile® Board Throughout

Formed from 12.5 mm Insutile® board — waterproof XPS core with reinforced faces. Niches suit wall cavities of 100 mm or deeper.

1 pieceper component
Factory-Formed Geometry

Supplied as one pre-formed unit — the sizes, angles, and falls are set at the factory, not assembled on site.

Insutile® Trays and Niches video

Product Video

Trays and Niches explained

This animation shows the niches, corner shelves, and seats in the range, how a niche is formed from 12.5 mm board with its front flange, the seven standard niche sizes, how a niche is fixed through the flange and tiled with the wall, the corner shelf on concealed brackets, seats and benches made to the required dimensions, and the niche shapes, seat styles, and corner shelf sizes that can be made to order.

All Product Videos

The Components

Standard components and made-to-order shapes

Niches, corner shelves, seats, and benches are produced in the standard sizes listed below. The range is not limited to them. Each component is also made to order in other shapes and sizes, and other pre-formed components can be made to a drawing.

Insutile® niches in six shapes: square, upright, arched, with shelves, horizontal, and long

Niches

One-piece recessed storage with a front mounting flange. Seven standard sizes, including an 800 × 400 mm niche with an adjustable shelf.

Made to orderSquare, upright, horizontal, long, or arched openings, with or without shelves, in other sizes and depths.

Insutile® corner shelves with triangular, rounded, and five-sided fronts in three sizes

Corner Shelves & Trays

A triangular shelf on concealed brackets, supplied with a drilling template and tiled over with the wall. 240 × 240 mm and 30 mm thick as standard.

Made to orderRounded or five-sided fronts, and other sizes.

Insutile® seats and benches: bench, open bench, L-shaped bench, corner seat, and curved corner seat

Seats & Benches

Shower seats and benches, fixed in place and tiled with the room. There is no standard size: each one is made to the required dimensions.

Made to orderClosed or open benches, corner seats with a straight or curved front, and L-shaped benches.

Other components made to order

The range is not limited to the shapes shown here. Other pre-formed components are made to order from the dimensions or drawing supplied.

Request a quote

Sizes and Specs

Standard sizes and key performance specs

The values below are our manufacturing standards. All components can be customized — sizes, depths, and configurations are manufactured to order.

Download Data Sheet

Size Chart · Niches, Shelves & Seats

ComponentSizeDepthNotes
Niche400 × 200100—
Niche400 × 300100—
Niche400 × 400100—
Niche400 × 500100—
Niche600 × 300100—
Niche800 × 400100adjustable shelf
Niche1200 × 400150—
Corner shelf / tray240 × 24030 thickconcealed brackets
Seat / benchto orderto ordermade to measure

All values in mm · every component can be custom-made — sizes, depths, and configurations on request

Specification Sheet · Trays and Niches

PropertyValueStandard
ConstructionInsutile® board · 12.5 mmpre-formed, one-piece
Core materialExtruded polystyrene (XPS)closed-cell, high-density
Surface finishCementitious, fiberglass meshtile-ready
Water absorption≤ 0.1 %EN 12087
Compressive strength≥ 300 kPaEN 826
Thermal conductivityλ ≤ 0.034 W/mKASTM C518
Reaction to fireClass EEN 13501-1

Where Insutile® Trays and Niches Perform

Storage and seating in tiled wet areas

View Bathroom Solutions
Tiled recessed niche in a modern walk-in shower Recessed storage niche and corner shelf in a bathroom Tiled bench and niche in a steam room Stacked niches in a hotel bathroom shower Tiled seat in an accessible level-access shower New recessed niche in a renovated bathroom

Showers & Wetrooms

Recessed niches replace wire racks and shelving — storage within the waterproof tiled wall.

Bathrooms

Recessed wall storage and corner shelving in any tiled bathroom wall built on Insutile® board.

Steam Rooms & Spas

Seats, benches, and niches for continuously wet, heated environments.

Hotel Bathrooms

Repeatable, factory-identical niches and seats across multi-room fit-outs.

Accessible Showers

Pre-formed seats support level-access shower layouts planned around seated use.

Renovation

Formed components fit into refurbished walls without site carpentry or masonry forming.

Key Features & Benefits

Performance characteristics

One-Piece Components

Factory-formed geometry — no site carpentry, no assembly, consistent dimensions on every unit.

Waterproof

Closed-cell XPS core and sealed construction — suitable for the wettest zone of the room.

Ready to Tile

Reinforced faces take tile adhesive directly — tiled together with the surrounding wall.

Built-In Fixing Flange

Niches carry a front flange that sits flush with the wall board and fixes through it.

Thermal Insulation

The insulating core keeps seats and benches warm to the touch in heated rooms.

Custom Sizes

Every component can be manufactured to order — sizes, depths, and configurations to suit the design.

Installation Steps

Seven steps for a recessed niche

Download Guide
01Set out & cut the opening 02Dry-fit the niche 03Fix through the flange 04Seal the joints 05Waterproofing 06Tiling 07Finishing
Installation Note · The Flange Carries the Fixing

The niche flange sits flush on the face of the wall board and fixes through it with screws and washers, bedded in MSP sealant-adhesive. Check the wall cavity gives at least 100 mm clear depth before cutting the opening.

Corner Shelves & Seats

Corner shelves fix with the supplied concealed brackets using the drilling template, then tile over. Seats and benches are bedded and fixed like boards, then taped, waterproofed, and tiled.

Steps shown are a general guide — site conditions and substrates vary; always confirm the method with a qualified contractor or specifier.

FAQ

Frequently asked questions

What is in the Trays and Niches range?

Recessed niches, corner shelves and trays, and shower seats and benches. Each is supplied as one pre-formed piece made from 12.5 mm Insutile® board.

What niche sizes are available?

Seven standard sizes from 400 × 200 mm to 1200 × 400 mm, including an 800 × 400 mm version with an adjustable shelf. Other sizes, depths and configurations are manufactured to order.

How deep must the wall cavity be?

At least 100 mm clear depth. Check this before cutting the opening.

How is a niche fixed?

The front flange sits flush on the face of the wall board and fixes through it with screws and washers, bedded in MSP sealant-adhesive.

Can the components be tiled directly?

Yes. The reinforced faces take tile adhesive directly, and each component is tiled together with the surrounding wall.

Range

Explore Our Range

Insutile® offers a complete line of specialty construction insulation products:

All Products

Ready to Specify Trays and Niches?

Get in touch with our technical team for sizes, configurations, and made-to-order components.