A product by Insutech Downloads EN

Steam Rooms · Spas · Wellness Suites

Complete Spa & Wellness Systems

Lightweight Construction Boards

See exactly where every Insutile® product is used in a real spa installation. Explore the hotspots to see each product in detail.

A finished spa and steam room built on the Insutile® system
Home/Solutions/Spa & Wellness

Where Insutile® Products Are Used

One spa, every product in place

Click on any numbered hotspot to learn which product is used, why it matters, and how it fits into the complete system.

Insutile® spa and steam room system cutaway with numbered product hotspots
01 · Build Board

Steam Room Walls

Waterproof, insulated walls for continuously wet rooms

  • Closed-cell XPS core is unaffected by constant steam and humidity
  • Thermal insulation holds heat in the room — faster warm-up, lower running cost
  • Cementitious faces take mosaic and large-format tile directly
  • No mould, no swelling, no delamination in permanently wet conditions
02 · Build Board & Angle Board

Benches & Loungers

Self-supporting tiled spa furniture

  • Rigid boards form benches, loungers and seats without timber framing
  • Light enough to build free-standing forms, strong enough to tile and use daily
  • Angle Board seals every junction where seats meet walls and floors
  • The insulated core keeps heated benches warm to the touch
03 · Flex Board

Curved Features

Curved walls, columns and contoured forms

  • Flex Board bends to a minimum radius of 200 mm for tight curves
  • Follows curved partitions, columns and contoured lounger forms
  • Same waterproof XPS core and tile-ready faces in a bendable format
  • Pairs with Angle Board where curves meet flat walls
04 · Shower Underlay

Spa Shower Areas

Pre-sloped, level-access shower zones

  • Factory-formed falls guide water to point or line drains
  • Level-access entry suits barefoot, wet-zone circulation
  • Custom tray sizes and drain positions to suit the room layout
  • Waterproof XPS base; a waterproofing membrane is applied over it in most showers
05 · Build Board

Floors

Insulated, waterproof floors throughout

  • A continuous waterproof layer under all floor tiles
  • Insulates floors and works with underfloor heating
  • High compressive strength handles constant barefoot and service traffic
  • Lays over existing screeds without demolition
06 · Angle Board & Accessories

Corners & Junctions

Watertight transitions in continuously wet rooms

  • Pre-formed 90° sections seal wall-to-wall and wall-to-floor junctions
  • Sealing tape and corner seals keep every joint watertight
  • One continuous board surface across transitions, ready for waterproofing and tiling
  • Protects the most failure-prone details in a spa environment

Tip — each hotspot links straight to the product page for full specs and installation guidance.

The Complete System

Everything you need for a complete spa

Five Insutile® products work together to deliver a heat-proof, waterproof, tile-ready wellness space.

Ready to Specify Your Spa System?

Our technical team can help you scope the right system for your project, from specification through installation.