A product by Insutech Downloads EN

Roofs · Terraces · Balconies

Complete Roof & Terrace Systems

Lightweight Construction Boards

See where each Insutile® product is used in a roof terrace build-up. Explore the hotspots to see each product in detail.

A finished roof terrace built on the Insutile® system
Home/Solutions/Roofs & Terraces

Where Insutile® Products Are Used

One terrace, every product in place

Click on any numbered hotspot to learn which product is used, why it matters, and how it fits into the complete system.

Insutile® roof terrace system cutaway with numbered product hotspots
01 · Easy Board

Terrace Floor

The tiled finish and the insulation in one layer

  • Pre-tiled panels lay the finished surface and the insulation together
  • No screed and no separate tiling stage on the roof
  • Closed-cell XPS core is unaffected by rain and standing water
  • A fraction of the weight of a screed-and-tile build-up
02 · Build Board

Parapet Walls & Upstands

Tile-ready linings for walls and upstands

  • Lines parapets and upstands with a waterproof, tile-ready face
  • Insulates the wall as it clads it
  • Fixed mechanically with screws and washers
  • Takes tile, stone, or render finishes directly
03 · Build Board & Angle Board

Built-In Benches

Self-supporting tiled seating

  • Rigid boards form benches and seating without timber framing
  • Angle Board closes and seals the exposed edges
  • Weather-resistant construction suited to open terraces
  • Tiled to match the terrace floor and walls
04 · Angle Board & Build Board

Planters & Boxing

Formed planter boxes and service boxing

  • Pre-formed angles make clean planter boxes and service enclosures
  • Waterproof construction contains soil moisture and irrigation
  • Boxing conceals pipes and roof services, ready to tile
  • Flex Board follows curved planter walls where the design calls for it
05 · Easy Board

Insulation Layer

The thermal layer beneath the finished surface

  • The precision-cut XPS core carries the roof's thermal performance
  • λ ≤ 0.034 W/mK, maintained in humid and wet conditions
  • Reduces heat gain through the slab in hot climates
  • Thickness specified to the required thermal value
06 · Accessories

Junctions & Waterproofing

Sealed joints, falls, and drainage details

  • Waterproofing membrane and sealing tape protect joints and penetrations
  • Movement joints sealed with flexible sealant in large areas
  • Point and line drains from the accessories range
  • MSP sealant seals junctions and penetrations; panels are bedded as set out in the Easy Board installation guide

Tip — each hotspot links straight to the product page for full specs and installation guidance.

The Complete System

The products in a roof & terrace system

Five Insutile® products work together to deliver an insulated, waterproof, finished roof or terrace.

Ready to Specify Your Roof System?

Our technical team can help you scope the right system for your project, from specification through installation.